P38A Turbo out, exhaust manifold off - broken & missing bolts

Mukiwa · Aug 15, 2016

Hi all,
I finally got the turbo off to clean & check it and the waste gate. Waste gate actuator seemed stuck but after some persuasion with wd40 and a bit of time it's now moving. Actuator seems ok now so I'm going to refit unless someone has advice otherwise.

Does anyone have either the part numbers & supplier or can I buy off you the following:
1 x r clip for wastegate & turbo pivot (mangled)
1 x exhaust manifold hex head bolt (missing)
3 x turbo / manifold mounting bolts - (1 sheared and as I needed to remove with my rattle gun I want new ones)
cheers,
Hoppy

ovalandrover · Aug 15, 2016

I had to buy Turbo bolts from main dealer and isnt the maniofld studded ?

Mukiwa · Aug 15, 2016

Thanks Ovalandrover, on mine I had 3 x multi pointed bolts through the manifold into the turbo. Also my exhaust manifold to head has allen key bolts not studs. Maybe a Friday pm special!
cheers,
Hoppy

Grrrrrr · Aug 15, 2016

Can't help but remember lots of photos for when we have to do the same!

wammers · Aug 16, 2016

Part number for turbo bolts is PYP100650L. Nothing for clip you will have to improvise. Manifold is better studded, but if you replace the Allen bolt make sure it is HT and not an Halfrauds special.

Mukiwa · Aug 24, 2016

Wammers thanks mate. Studs would definitely be easier that's for sure!

Grrr I'll take pics before I reassemble - nice hi res ones

Mukiwa · Aug 24, 2016

Wammers are there part numbers for the studs mate please? If so I'll fit those as I can see fitting the hex bolts is going to be a marathon swearathon

SpanishTony · Aug 24, 2016

Nice to see someone local here, I'm in Northwich.

wammers · Aug 24, 2016

Mukiwa said:
Wammers are there part numbers for the studs mate please? If so I'll fit those as I can see fitting the hex bolts is going to be a marathon swearathon

Studs are 8510231 14 off. Nut to suit 8510235 14 off. Look around for best prices.

Mukiwa · Aug 25, 2016

SpanishTony said:
Nice to see someone local here, I'm in Northwich.

Hi Tony,

Nice to see someone local as well, I thought the nearest was Wammers

If you need any help and I'm available give me a shout - not sure if I'm any good though hahahaha

Mukiwa · Aug 25, 2016

wammers said:
Studs are 8510231 14 off. Nut to suit 8510235 14 off. Look around for best prices.

Cheers Wammers, as always!

tomcat59alan · Aug 26, 2016

Mukiwa said:
Hi Tony,

Nice to see someone local as well, I thought the nearest was Wammers If you need any help and I'm available give me a shout - not sure if I'm any good though hahahaha

I'm closer.

wammers · Aug 26, 2016

tomcat59alan said:
I'm closer.

Yeah you are that is a good reason for him not to let his wife out without an escort.

tomcat59alan · Aug 26, 2016

wammers said:
Yeah you are that is a good reason for him not to let his wife out without an escort.

Your not doing escorts again are you Tony, thought you had given that up after the last lot of trouble.

Mukiwa · Aug 27, 2016

tomcat59alan said:
I'm closer.

Where abouts?

tomcat59alan · Aug 27, 2016

Mukiwa said:
Where abouts?

Emmm, Wirral.

Mukiwa · Aug 29, 2016

Ah yes, I fell for the not reading the location box trick, again! hahaha

P38A Turbo out, exhaust manifold off - broken & missing bolts

Mukiwa

Well-Known Member

ovalandrover

Well-Known Member

Mukiwa

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

wammers

No longer with us, RIP

Mukiwa

Well-Known Member

Mukiwa

Well-Known Member

SpanishTony

Active Member

wammers

No longer with us, RIP

Mukiwa

Well-Known Member

Mukiwa

Well-Known Member

tomcat59alan

Well-Known Member

wammers

No longer with us, RIP

tomcat59alan

Well-Known Member

Mukiwa

Well-Known Member

tomcat59alan

Well-Known Member

Mukiwa

Well-Known Member

Similar threads