Transfer box appears to be wrong way round please read

tomkettlewell · Jun 9, 2013

I have a 110 d reg v8 and it has a pto winch. The gear lever on the transfer box has the L scratched into a H and the H has been elongated into a L
I am not with the truck so cannot check but I guessed the boxwas knackered but is there any conceivable way it could be geared opposite and that it may be to do with the pto fairey winch?

abcdedd · Jun 9, 2013

I thought if people posted topics then people read them as a general idea of a forum.. Didnt realise i had to ask in my topic titles for people to read them..

landowner · Jun 9, 2013

tomkettlewell said:
I have a 110 d reg v8 and it has a pto winch. The gear lever on the transfer box has the L scratched into a H and the H has been elongated into a L
I am not with the truck so cannot check but I guessed the boxwas knackered but is there any conceivable way it could be geared opposite and that it may be to do with the pto fairey winch?

I had an 84 110 V8 on an 'A' reg and that too was back to front, think it was the way the linkage was set up

jamesmartin · Jun 9, 2013

high is rear ward low forward, the splined cam, linkage fastens to can be fitted on wrong way round ,reversing h and l

tomkettlewell · Jun 9, 2013

I figured some smart arse would see it as it's impossible to put a transfer box on the wrong way round hence please read. Oh and thanks for your help it's invaluable

Pikey · Jun 9, 2013

abcdedd said:
I thought if people posted topics then people read them as a general idea of a forum.. Didnt realise i had to ask in my topic titles for people to read them..

I wouldn't bother Nobody reads your threads anyway.. :bounce:

tomkettlewell · Jun 9, 2013

Cheers guys I'll check next week when I'm with truck to see if it is incorrect and if so should I remove the linkage and spin it 180degs or just leave it alone?

Pikey · Jun 9, 2013

Has the transfer box been changed to an LT230. early V8's had 4speed lt95 which had the transfer box built in, with a Vacuum operated difflock Dun't know which way round high low was but it could have been reversed???

Just a guess that last bit.

abcdedd · Jun 9, 2013

Never know, might do if i ask

Pikey · Jun 9, 2013

can anyone else hear an annoying noise???.

jamesmartin · Jun 9, 2013

redhand said:
can anyone else hear an annoying noise???.

yes can you keep it down

blue beasty · Jun 9, 2013

redhand said:
can anyone else hear an annoying noise???.

Sort of a distant whinning?

Transfer box appears to be wrong way round please read

tomkettlewell

New Member

abcdedd

New Member

landowner

Pensioner Pete

jamesmartin

Well-Known Member

tomkettlewell

New Member

Pikey

Dummy Ejection Facilitator..

tomkettlewell

New Member

Pikey

Dummy Ejection Facilitator..

abcdedd

New Member

Pikey

Dummy Ejection Facilitator..

jamesmartin

Well-Known Member

blue beasty

Leaks an prone to bits dropping off

Similar threads