gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
can anyone tell me the throttle position sensor type please?
i need to know whether its 0-5v or 5-0v
i need to know whether its 0-5v or 5-0v
tps
- Thread starter gavbriggs
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
0-5v according to rave page 356
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
guess you got rave working then!!! does it say anything about lambda voltage?
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
the voltage of the h02s sensors at the stoichiometric point is 450 to 500mv, the voltage decreses
to between 100 and 500 mv if there is an increase in oxygen temperature ie a lean mixture,
the voltage increases to between 500 and 1000mv if there is a decrease in oxygen contaent, signifying
a rich mixture
does that help? i have no idea what it means but it looked good
eightinavee
Well-Known Member
- Posts
- 3,956
- Location
- UK.
Not quite - Gav's truck is a Gems one,so its oxy sensors are Titania 5-0v ones.So an output of 5v is lean,0v is rich.the voltage of the h02s sensors at the stoichiometric point is 450 to 500mv, the voltage decreses
to between 100 and 500 mv if there is an increase in oxygen temperature ie a lean mixture,
the voltage increases to between 500 and 1000mv if there is a decrease in oxygen contaent, signifying
a rich mixture
does that help? i have no idea what it means but it looked good
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
its for the lpg setup, i wanna get it spot on, just got to get all the settings correct. as i'm not too experienced with lpg i wanted to have someone send me thier setup file so i can compare em but i cant find any p38's with a aeb leonardo controller!
