Grahamsgl84
Member
- Posts
- 30
- Location
- Liverpool
Hi guys still no closer to solving the top hose pressuring on my tdv8 any more help would be very much appreciated thanks
Top hose nightmare tdv8
- Thread starter Grahamsgl84
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
I do not know the tdv8 but have you checked that there is no blockage in the radiator?
Grahamsgl84
Member
- Posts
- 30
- Location
- Liverpool
That's my next step
Grahamsgl84
Member
- Posts
- 30
- Location
- Liverpool
Yes fans all good belts all good when u take the return off the tank flows nice but when u rev it the is alot of air coming through
Hi Graham, I had problems with my L322 with cold heating, and expanding hose, get a big pop bottle cut bottom off put it in header tank make a good air tight seal fill with coolant start engine and keep topping bottle up if you have air it will push it out, the idea is to make the header tank night this removing air that's trapped, hope this helps. Rob
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
So that sounds like you have an air lock. With some cars, P38 and others, it is easier to get the air out if the front of the car is raised.
