Other top engine cover

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
just had a read of this

The 2.7 litre (2720 cc) V6 'lion' engine is a member of the Ford Duratorq family of engines and was designed by Ford engineers at their Dunton and Whitley product development centres. It is called the AJD-V6 by Jaguar, theTDV6 by Land Rover and the DT17 by PSA Peugeot-Citroën. In October 1999 Ford and PSA extended their diesel engine joint-venture to include this Euro 4 rated V6 engine.

This V6 diesel engine utilizes a 60° V configuration. The Land Rover version has a single turbocharger of a larger capacity than the twin-turbo design. This is to improve the engine's low-speed torque range for off-road and towing applications. It is also fitted with a very large, engine driven cooling fan to support low speed, but high load driving such as those that may be encountered in desert conditions. Other changes made to the Land Rover version of the engine over the Ford/Jaguar/Peugeot versions include a deeper high-capacity sump with improved baffles to maintain oil pressure at extreme off-road angles and multi-layered external seals to keep out dust, mud and water. The engine is produced in Ford's Dagenham engine plant.
 
plus the td4 with the m47 engine

Oh that one as well, but it is small and I had forgotten it.

Ford supplied the V6 Diesels, V8 Diesels, the Tran**** engine for the Defender (yes it is ****), the Mondano engine for the Freelander 2.

BMW did the straight 6 and the late FL1 Diesel.

Landrover stopped at the straight 5
 
well tried the vw ones, none of them are any good

the land rover one is around an inch in dia, the vw are at least twice the size

so going to carry on looking
 
Every possibility that the Jag ones might fit ......

managed to find some , but refuse to pay £8 each for them

looked at the jag ones , thinks it's the s type the engine is fitted to , looks very similar

just got to find part number, can then quote that to breakers

don't mind paying £2-3 quid each

am thinking also to see if i can use some grommets, sticking them together with some glazing silicone and won't cost much

it's only an engine cover after all and won't be seen,
 
Back
Top