Dann
Active Member
- Posts
- 545
- Location
- Middle Earth
If you're about to dismantle complex mechanical or electrical assemblies, take some digital photos before commencing. D..
TIP: Before stripping take a digi photo
- Thread starter Dann
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
50cc
Member
- Posts
- 76
- Location
- Westerland, The Netherlands
And then upload them to this site! In case someone else forgot to take pictures...
Snow
New Member
- Posts
- 261
- Location
- steyning, west sussex
i always take loads and loads of pics when im working on something, especially where bolts go lol ive started putting the bolts back into places where ive taken something off so i dont loose them!!
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
:nopics:
You can also shove the camea in hard to see places and take a quick pic.
no smutty remarks please..
If you have to do it that way it normally means there is no daylight overthere which then shows the problem that the flash is useless as just enough room for the lens and the flash being above it .......
You are obviously a younger person with good eyesight and can probably see in dark places under the landy. 'Fraid I can't
You are obviously a younger person with good eyesight and can probably see in dark places under the landy. 'Fraid I can't
Younger person "probably yes" - better eyesight "don't know..."
Sorry but can't figure out what all these figures below mean ??
Mini Statistics
Age 61 Join Date 24th-May-2008 Total Posts 818
Mini Statistics
Date of Birth March 30, 1942 (67) Join Date 2nd-August-2005 Total Posts 1,379
Last edited:
disco_mikey
Active Member
- Posts
- 728
- Location
- Dundee, Scotland
Pictures are only there to show people what it used to look like before we f****d it up
Sorry but can't figure out what all these figures below mean ??
Mini Statistics
Age 61 Join Date 24th-May-2008 Total Posts 818
Mini Statistics
Date of Birth March 30, 1942 (67) Join Date 2nd-August-2005 Total Posts 1,379[/quote]
Must be me then
I very often shove the camera under the Landy and take a quick pic to save me getting under there as I can see frig all in the dark any way.
Works for me
Mini Statistics
Age 61 Join Date 24th-May-2008 Total Posts 818
Mini Statistics
Date of Birth March 30, 1942 (67) Join Date 2nd-August-2005 Total Posts 1,379[/quote]
Must be me then
I very often shove the camera under the Landy and take a quick pic to save me getting under there as I can see frig all in the dark any way.
Works for me
Fitted my de-cat pipe yesterday, had to Angle grind all six bolts off!! Sounds better, and seems to pull better.
http://i30.tinypic.com/2untzbs.jpg
http://i28.tinypic.com/ogcqzc.jpg
http://i30.tinypic.com/2untzbs.jpg
http://i28.tinypic.com/ogcqzc.jpg
Hi, and so do I. Take a pic. instead of getting down on the ground and try to see things. This used to be no problem at all (when I worked at my previous cars, being much younger of course, I could lay on my back and get up on my feet without touching the ground with my hands, no problem when I had something in hands and because of the grease or so I had to keep it up) but these days it's becoming hard to 'crawl' up again when been looking under the car, even with the help of both hands.......
Similar threads
