Thoughts on signwriting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landroverjack

landroverjack

New Member
Posts
3,282
Location
NW Scotland
I've been thinking of signwriting the van sides of my 110 for a while but there have always been problems.

First, I do like to go greenlaning in it, and I'm worried it will quickly look very tatty if it gets scratched. I don't mind getting the paintwork scratched but I would mind the stickers getting ripped apart.

Second, I can't use anthing magnetic because of the aluminium body.

So, I was thinking of having another sheet of aluminium cut to the same size as the van sides which was signwritten, and bolting it to the side so that i would just have a few bolts to undo every time I want to go laning.

Anyone think this would work? Any other ideas?

Cheers, Jack
 
landroverjack said:
I've been thinking of signwriting the van sides of my 110 for a while but there have always been problems.

First, I do like to go greenlaning in it, and I'm worried it will quickly look very tatty if it gets scratched. I don't mind getting the paintwork scratched but I would mind the stickers getting ripped apart.

Second, I can't use anthing magnetic because of the aluminium body.

So, I was thinking of having another sheet of aluminium cut to the same size as the van sides which was signwritten, and bolting it to the side so that i would just have a few bolts to undo every time I want to go laning.

Anyone think this would work? Any other ideas?

Cheers, Jack
Click to expand...


Only if you do
 
Why not go down the magnetic route then glue thin steel sheets of the same/smaller size on the inside of the side panels?

Ok it will add a few kgs of weight but your not going to have holes drilled/spikes sticking out of the sides.

also you can remove them when you want...if the local kids don't first :rolleyes:
 
What do you want to write on the side? my personal view is if its not your work car or company logo etc its better to leave it original. Nothing says small man with small c@*k like a big ass 4x4 sticker on the side of a perfectly good vehicle. It's normally found on the side of a NISSAN
 
If it is for work, then sign write away.

Be aware one of my best friends owns a sign company, he refuses to sell magnetic ones as they fall off or get nicked etc.

One on the back way work but the sides always lose them.

i had a full wrap on a commercial van for 3 years and it lasted well, but i didn't take the van laning..

if you want some technical input pm me and i will pm the sign mans details
 
Boris113 said:
Why not go down the magnetic route then glue thin steel sheets of the same/smaller size on the inside of the side panels?

Ok it will add a few kgs of weight but your not going to have holes drilled/spikes sticking out of the sides.

also you can remove them when you want...if the local kids don't first :rolleyes:
Click to expand...

Won't this ruin the aluminum? and it would be really easy to nick too?

Rean said:
What do you want to write on the side? my personal view is if its not your work car or company logo etc its better to leave it original. Nothing says small man with small c@*k like a big ass 4x4 sticker on the side of a perfectly good vehicle. It's normally found on the side of a NISSAN
Click to expand...

Its for a future business I am going to start, don't worry :p:p
 
Cavey_P38 said:
If it is for work, then sign write away.

Be aware one of my best friends owns a sign company, he refuses to sell magnetic ones as they fall off or get nicked etc.

One on the back way work but the sides always lose them.

i had a full wrap on a commercial van for 3 years and it lasted well, but i didn't take the van laning..

if you want some technical input pm me and i will pm the sign mans details
Click to expand...

PM sent, cheers mate
 
If you go down the extra bolt-on panel, why not make it hinged in the middle (horizontally or vertically.) One half permanenty fixed and one half with some sort of clip so that it simply folds up as and when required?
 
Clanforbes said:
If you go down the extra bolt-on panel, why not make it hinged in the middle (horizontally or vertically.) One half permanenty fixed and one half with some sort of clip so that it simply folds up as and when required?
Click to expand...

Thats a pretty good idea, wish I had thought of that! :) I'm going to have to think about how to make it look neat when folded out now though.

Station House said:
Or Velcro

No, sorry, just being silly now:eek:
Click to expand...

I wouldn't have guessed ;):D
 
advertising on the side of your wagon makes you commercial.

do you want to pay commercial insurance and get charged whereever you go?

contents insurance is expensive.......
 
And be careful if your towing something heavy too cos if it's signwritten and used for towing heavy things you need a tachograph as far as I'm aware because your using it for business (even if you arent it looks like you are) my mate got cautioned about it before towing his minidigger with his signwritten Landy, so he just took the stickers off it was cheaper than a tacho! Lol
 
jimbo-td5 said:
And be careful if your towing something heavy too cos if it's signwritten and used for towing heavy things you need a tachograph as far as I'm aware because your using it for business (even if you arent it looks like you are) my mate got cautioned about it before towing his minidigger with his signwritten Landy, so he just took the stickers off it was cheaper than a tacho! Lol
Click to expand...

I never tow anything with it, and even if i did, I could just take off the extra side panels, right?
 
landroverjack said:
I never tow anything with it, and even if i did, I could just take off the extra side panels, right?
Click to expand...


I think what he might be saying is if your defender looks like a commercial vehicle you might get noticed by the LAW alot more often. do you need commercial plates or license in the uk? Could get sticky.
 
I was thinking about this for my Defender and I also do Green Laning.

The problem I have, is that my Customers are the type of people that walk Green Lanes and complain of us lot using byways etc, so I gave it a miss, as you don't want bad advertisement for your Company!

What I would say tho, why don't you just get a spare wheel cover with your business details on? People driving by won't get chance to pick your number up from the side of the vehicle, but people who are following you will.

You can also take it off as and when you want!

It is also cheaper, you can swap it onto other Defenders and looks pretty smart.
 
Woody3 said:
I was thinking about this for my Defender and I also do Green Laning.

The problem I have, is that my Customers are the type of people that walk Green Lanes and complain of us lot using byways etc, so I gave it a miss, as you don't want bad advertisement for your Company!

What I would say tho, why don't you just get a spare wheel cover with your business details on? People driving by won't get chance to pick your number up from the side of the vehicle, but people who are following you will.

You can also take it off as and when you want!

It is also cheaper, you can swap it onto other Defenders and looks pretty smart.
Click to expand...

I agree, my mate has the same issue. So he got an A board for when he is working in the public view!
 
You must log in or register to reply here.

Similar threads

F
King Cab Advice
Replies
0
Views
279
foggy23
F
N
Disco 4 (LR4) advice on buying a used ulez compliant disco4
Replies
12
Views
571
lynall
L
N
Rivet size for AC Grille
Replies
5
Views
418
dag019
dag019
G
Registering a vehicle built from parts
Replies
12
Views
449
300bhp/ton
300bhp/ton
Z
Thoughts on a 2015 D4
Replies
8
Views
358
Graculus
Graculus
Back
Top