The Lights Are On...........

johnnyboy01 · Dec 20, 2008

But my heated seat don't heat-up

. Does anyone have any ideas

what could cause this problem?

Thanks

John

clutchdust · Dec 20, 2008

if its a p38 then its more than likely the elements have burnt out. check to make sure you have power and earth to the elements, if so then you'll need to replace them. Not for the faint hearted!

gavbriggs · Dec 20, 2008

the job is simple, its usually broken where the 'rib' in on the seat base, there is a guide on Heated Seat Repair Operations

2 mins to fix with crimp fittings, also route the element to the side a little to avoid it in future, it will take a bit of fiddling to get to it but i have done it and it works fine!!!!!

goonarmy · Dec 20, 2008

if yer heater works i wouldnt bother!

tufty · Dec 20, 2008

easy option . get the missus to sit in the drivers seat for 5 mins while you have a cup of tea. voilla !!! warm seat.

rob evans · Dec 20, 2008

Mine was the same both sides when i had it .the switches lit up but no heat.both pads had gone..they work ok now,but p38 seats dont get that hot not like the RR3.

The Lights Are On...........

johnnyboy01

New Member

clutchdust

Well-Known Member

gavbriggs

Well-Known Member

goonarmy

Beer tester

tufty

New Member

rob evans

Active Member

Similar threads