the hunt for genius

Why is all the rum gone?

that would be in the optic despencer i have attatched in the rear. right by the jaccuzzi and the revolving bed

you have to mind your head on the disco ball as you get up mind

If yer re-route yer egsorst yer can have a hot tub in the back fer free

hahaha, yeah i didn't think of that. isidentally i don't suppose you would happen to know what the defender's dash is made of and what would happen if i just drilled through it? i mean i could go with the ash tray idea, the Pez dispencer is hardly a must have. although my neice loves it

Ash tray tops med of reeeeeeeeeeeeely reeeeeeeeeeeeeeeely hard plastic. most of the dash is sheet steel covered with leatherettey type stuff or 1/2" of softy yet hard foamy stuff an leatherettey stuff. Most of it's ok fer self tappers.

Try maplins, I brought a clamp that will hold cam corder and camera on dash. It looks like a large peg.
Pm me if you need pitures.

Yea I got one of those wiv a long bendy arm. But it moves around too much.

There are two types, one with the bendy arm and one that has just an adjustable screw for cameras that is rock solid on the dash.

Clamp mine in middle of dash in open ash tray drawer and the underside of dash.

will post piccie later if needed.

I clamped mine on the grab handle in the disco.

woss rong wiv this?

that's eggzactly what mine is, with the suction cap removed and screwed to a lump of wood.

and I only paid £3.99 at Trago.

yu takin orders then Trewy.

do we get a free sticker with every one?

This is what I got but it moves all over the place Maplin > Flexible Photography Clamp

Treworgey 90 said:

that's eggzactly what mine is, with the suction cap removed and screwed to a lump of wood.

and I only paid £3.99 at Trago.

Click to expand...

what then screw it into the dash wiv the ol' self tappers?

saxon101 said:

what then screw it into the dash wiv the ol' self tappers?

Click to expand...

basically, yes.
I added a bit of angled ali and some springs to make it quickly detachable and provide a bit of vibration damping (have a close look at the photo).

This what I got, http://www.maplin.co.uk/Module.aspx?ModuleNo=45385&&source=14&doy=search





http://www.maplin.co.uk/images/full/a14cg.jpg
function Change_Big_One(hURL,Main,thumb){document.getElementById(Main).src = thumb.src.replace('/50/','/300/'); document.getElementById(hURL).href = thumb.src.replace('/50/','/full/'); } http://www.maplin.co.uk/Module.aspx?ModuleNo=45385&&source=14&doy=search#Download