So it usually just destroys both parts? I was hoping i could get away with a cheeky propshaft swap for nowIt's usually the internal spline in the drive tube which wears, together with the corresponding external spline on the end of the propshaft
Phil
In my experience with other shafts, when splines go, both parts are worn or damaged. Changing one part may work briefly.
Yeah i do have a later style prop sat, just going too have too book it in too get done, not that i grudge it needing anything done at this age and mileage, i had a car fall on me last week and landed on my head and chest so im sort of not upto dropping the subframe too change the diff, and since mots like a month away iv a few jobs to do for mot so was hoping to put off a labour intensive day till then,
Extremely lucky no denying that, 1500kgs of car on the chest and skull trapping me too the point people had too lift it off me somehow got out of hospital the same day with a bundle of stitches, and a couple of cracked ribs that was fine till i had a massive sneezing fit earlier today, now back at square one rib wise,Sounds like you are lucky to still be with us
You were very lucky,a good set of axle stands are a necessity. One of the first jobs I went to after I passed out of Cheshire County Fire Brigade training school was to a guy who was working on his car which was balanced on a scissor jack but not for long I'm afraid.DOA.Extremely lucky no denying that, 1500kgs of car on the chest and skull trapping me too the point people had too lift it off me somehow got out of hospital the same day with a bundle of stitches, and a couple of cracked ribs that was fine till i had a massive sneezing fit earlier today, now back at square one rib wise,
On topic though iv bought a diff with the later joint flange, iv also got someone posting just the later style flange only too, he was saying hes swapped early too late style and marks the stake nut and hasn't had an issue doing that, but even if it keeps me mobile for 4-5 weeks i should be fully back too normal and happy to drop the subframe again
It was on stands, front end nose up, i was undoing the rear propshaft and the guibo (same as the l322s have for the rear) was absolutely destroyed so in my eagerness i put a bar on one of the bolts to turn it slightly too get the nose of my impact gun on the 3 prop bolts i wanted undone usually i jack a rear wheel and spin it but that much was broken i thought i may have enough just too tweak , but used too much pressure and basically drove it off the stands, jack was still under the front subframe sort of but moved and jammed and couldn't be used, genuinely a terrifying experience laying there, safe too say the car went too scrap
Holy crap... Still here to tell the story matey
Hope you have done the lottery,the poor bugger wasn't injured,just wasn't able to breathe with the weight of the Cortina on himHoly crap... Still here to tell the story matey
.The watch sub officer said don't worry they're not all like this,next shout at 0530 was to a RTC head on between a bread delivery wagon and a mini. We were tasked with extricating the dead mini driver out of his car. his feet were trapped on the pedals and the floor was folded over them,he lay between the front seats and his head was on the rear parcel shelf, the impact must have broken every bone in his body. Made you make the most of every moment.Christ I must be getting maudlin,had a few drinks as my neighbour passed away.makes you think of your own vulnerabilityHope you have done the lottery,the poor bugger wasn't injured,just wasn't able to breathe with the weight of the Cortina on him
When Land Rover went to the expense of carrying out the Q041 Service Action on all the 2002-2005 L322s (2002-2006 for the diesels) they chose not to risk upsetting the pinion bearing preload and consequently each final drive was rebuilt with a new collapsible spacer and tail bearing (process shown below = 4.5 hours per vehicle). The bearing preload setting was confirmed by measuring the torque required to turn the unloaded pinion shaft assembly (1.4Nm +/- 0.2Nm). The potential consequences of a pinion bearing failure (e.g. seizure of the final drive) was obviously too great a risk for Land Rover not to go to this expense. Clearly that’s a corporate viewpoint for a company with potentially litigious customers. As an individual you may decide that it’s worth the risk – especially if it’s only for a limited time/mileage.....iv bought a diff with the later joint flange, iv also got someone posting just the later style flange only too, he was saying hes swapped early too late style and marks the stake nut and hasn't had an issue doing that, but even if it keeps me mobile for 4-5 weeks i should be fully back too normal and happy to drop the subframe again
Heat matey.... Economic fabrication
Live everyday like it's your last....Christ I must be getting maudlin,had a few drinks as my neighbour passed away.makes you think of your own vulnerability
When Land Rover went to the expense of carrying out the Q041 Service Action on all the 2002-2005 L322s (2002-2006 for the diesels) they chose not to risk upsetting the pinion bearing preload and consequently each final drive was rebuilt with a new collapsible spacer and tail bearing (process shown below = 4.5 hours per vehicle). The bearing preload setting was confirmed by measuring the torque required to turn the unloaded pinion shaft assembly (1.4Nm +/- 0.2Nm). The potential consequences of a pinion bearing failure (e.g. seizure of the final drive) was obviously too great a risk for Land Rover not to go to this expense. Clearly that’s a corporate viewpoint for a company with potentially litigious customers. As an individual you may decide that it’s worth the risk – especially if it’s only for a limited time/mileage.
Phil
Heads on back seats reminds me of an accident when I was a kid, a Vauxhall Cresta hit a lamp post on the Southend road at speed, the engine was pushed back into the cabin and the steering wheel had taken off the driver head which we found on the back seat a gory mess.Hope you have done the lottery,the poor bugger wasn't injured,just wasn't able to breathe with the weight of the Cortina on him
It was a bit of a shock to see as a 15 year old.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
