Td5 remap file by email

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well chaps, I have found an sd card, and after formatting it I have just recorded live data for the first time ever... speaking with storm tuning I hope I am able to get it mapped today exciting!!!
 
When I first formatted the card wouldn’t open any files this was using fat32, then after many failed attempts I used the format (fat) and now it works... confusing but hope it helps someone else
 
Well then guys... this morning Dan at storm tuning sent me my remap file, using my nanocom it uploaded in about 5 mins... I haven’t touched the turbo yet but Jesus Christ after driving a few miles for my engine to warm up I gave it beans and dear dear I have driven many td5s ( some tuned ) and I can honestly say after my remap it Just pulls and pulls and pulls... (with very little smoke) it’s incredible!
 
Last edited:
Well then guys... this morning Dan at storm tuning sent me my remap file, using my nanocom it uploaded in about 5 mins... I haven’t touched the turbo yet but Jesus Christ after driving a few miles for my engine to warm up I gave it beans and dear dear I have driven many td5s ( some tunes) and I can honestly say after my remap it Just pulls and pulls and pulls... (with very little smoke) it’s incredible!

You’ll have to do a video! Storm have good reviews. Are you on standard tyres/gearbox etc?
 
You’ll have to do a video! Storm have good reviews. Are you on standard tyres/gearbox etc?
Ok I’ll do a video... my landy sounds so nice now after the map... still got to adjust the turbo slightly though... I have 265 75 16 BFG all terrains and the gearbox is standard...
 
Do you have an EGT gauge? Would be interesting to see what it gets up to
No EGT gauge on mine that’s a job for the near future do you have one on yours? I watched the coolant temp on nanocom and it stayed at 92 degrees (flat out up hill) the same as when standerd
 
Well then guys... this morning Dan at storm tuning sent me my remap file, using my nanocom it uploaded in about 5 mins... I haven’t touched the turbo yet but Jesus Christ after driving a few miles for my engine to warm up I gave it beans and dear dear I have driven many td5s ( some tuned ) and I can honestly say after my remap it Just pulls and pulls and pulls... (with very little smoke) it’s incredible!

If you don’t mind me asking out of interest what did they charge for a file by email?
 
Looks pretty good in all fairness, have you ever seen it get mega hot?

I won’t say how much but I can tell you it’s near to what the rest of them charge

No the most I’ve seen is 600 degrees but from posts on here they can get very near 1000 degrees without knowing about it.

Of equal concern is the coolant temp people have seen 110 yet because the standard gauge does not report this you carry on as normal. I’ll soon be fitting a gauge that gives a true reading
 
Last edited:
No the most I’ve seen is 600 degrees but from posts on here they can get very near 1000 degrees without knowing about it.

Of equal concern is the coolant temp people have seen 110 yet because the standard gauge does not report this you carry on as normal. I’ll soon be fitting a gauge that gives a true reading
Wow that’s extremely hot no wonder you here horror stories from time to time... I still need to shorten the turbo actuator arm , Dan at storm tuning said a few turns should do it so I’ll give that a go tomorrow... not sure wether or not to set injector clearances just to be on the safe side? Definitely will look into the egt temp gauge though what’s the safe limit?
 
I’m tempted to send them one of my ecus to see how they compare to the Dynachip one I’ve got at the moment.
Too be fair there would be no loss as you could always sell one?

It has transformed mine, revs so cleanly now and pulls like a train but I haven’t touched the turbo yet
 
Too be fair there would be no loss as you could always sell one?

It has transformed mine, revs so cleanly now and pulls like a train but I haven’t touched the turbo yet

I’ve got several ecus floating about just in case! Lots of good reviews on storm and the fact you’ve driven chipped td5’s and still impressed is a good sign.

When you adjust the wastegate rod make sure that when it’s hitting it’s max (235/240ish on inputs fuelling) it’s up hill and properly under load. Dynachip did mine and for various reasons I’ve not used it much since but recently had to lengthen it a bit as it was overboosting up hills.
 
I’ve got several ecus floating about just in case! Lots of good reviews on storm and the fact you’ve driven chipped td5’s and still impressed is a good sign.

When you adjust the wastegate rod make sure that when it’s hitting it’s max (235/240ish on inputs fuelling) it’s up hill and properly under load. Dynachip did mine and for various reasons I’ve not used it much since but recently had to lengthen it a bit as it was overboosting up hills.
He said to adjust the turbo on the nanocom to between 1.3 to 1.35 so I’ll probably stick it somewhere between that... at the moment it’s only hitting 1.29
 
Back
Top