AdrianC
Member
- Posts
- 71
- Location
- Tenterden Kent
Hi all.
I am rebuilding the engine and have put the head / cam cover back on but when I tighten the injector clamps to 10nm All The injectors are loose?
I have put new copper washers on but all the injectors move up and down by approx 2-3mm.
Is this right?
I am rebuilding the engine and have put the head / cam cover back on but when I tighten the injector clamps to 10nm All The injectors are loose?
I have put new copper washers on but all the injectors move up and down by approx 2-3mm.
Is this right?