Td4 boost pipes

Upgrading the turbo and hoses on my td4 and got a silicon hose kit I have all the hoses except this one in the picture does any one have a link or the where abouts where I can get one as it's not just a simple right angle is sized differently on either end thanks in advance

That's not a Td4, and the right-angle hose you speak of is the same both ends. Are you sure you ahve the right kit?!

I emailed DPH as I was concerned that on the car it is bigger on the EGR than on the plastic part it goes too they said no it the same either end so I re measured and I was right (just can not think of the size at the moment) I emailed them back say I was right they said phone the making department which I am going to do .

Oops, lost my bearings - thought the pic was showing the EGR, not the turbo. No wonder it looked different!

I have fitted a couple of Britpart EGR elbows to friends' Freelanders and they were the same both ends - took a bit of squeezing and fiddling but I thought that was just crappy Britpart rubber.

Can't help you with the hose in the pic.

that hose in the picture is different sizes at both ends as well I found the elbow one for the egr was a bit too big on the end where it goes onto the plastic . not the EGR end

teddywood1 said:

that hose in the picture is different sizes at both ends as well I found the elbow one for the egr was a bit too big on the end where it goes onto the plastic . not the EGR end

Click to expand...

Did you manage to get a specific pipe for yours in the end thanks Scott