tall people

Hello all

Im around 6.4 ,and my 90s not the biggest , is there any way of improving leg room with out cutting the bulkhead to fit them seat risers ? , do any other seats give greater legroom ? Thanks

Is it a truck cab, hard top or csw?

bulkhead removal bar or bucket seats ?

Defender seats are'nt too bad you can fit Mud rails which raise the seat by 1 to 2 inches this helps. failing that I have seen woodon packers used andx when suitably comfortable they have made metalo box section seat rails.

You can gain about 2 to 3 inches of depth in the seat b y raising them above the edge on the tub/seat box

Get shorter legs? I. Sure the nhs are doing a special offer atm

Ahve a look at the seat risers, should give you a little more room

A smaller steering wheel might help

Bulkhead removal bar would be good, I would get one, if I didn't have stereo speakers on mine

I'm 6'10" and thinking about mud rails but while they extend leg room they raise you up 3cms too. So I'm looking at eating into the box a little... Although I'd prefer a "non surgical" solution.

At 6' 5" and fairly rotund - Mud rails worked for me - combined with a new smaller steering wheel. A lot less hassle than getting your legs shortened or indeed dieting!

if you have a truck cab, then any other body will give you more room I had a series 3 truck cab, and that was a struggle to get in to for me, and I'm only 6'2" Plenty of room in my 90 hard top though!

thanks guys , il give them mud rails a try . and a smaller wheel

With the mud rails moving the seat further back does that mean you will be sitting more upright as the back of the seat cant recline as much?

johns90 said:

With the mud rails moving the seat further back does that mean you will be sitting more upright as the back of the seat cant recline as much?

Click to expand...

Good Point , I dont want to be ,as thay say , sit up and beg , :hippie:

I see mud rails need to be used in conjunction with the bulkhead removal kit. But my 90 is a 2011 model, so how does one deal with the "bulkhead"?

Keithw said:

I see mud rails need to be used in conjunction with the bulkhead removal kit. But my 90 is a 2011 model, so how does one deal with the "bulkhead"?

Click to expand...

A saw

That might affect the warranty

Keithw said:

That might affect the warranty

Click to expand...

Would still be better than how Land Rover would remove it

I am 7'4" tall and cannot even get into my garage, far less my Landy but I find my height reduces when I take the Elton John style platform shoes off. Then I am only 6'2".

crashbox said:

I am 7'4" tall and cannot even get into my garage, far less my Landy but I find my height reduces when I take the Elton John style platform shoes off. Then I am only 6'2".

Click to expand...

Sometimes a boy just wants to feel pretty.