P38A Switches

martyuk · Mar 18, 2016

Front of the switch just pops off, but you don't need to take it out to remove the lamps. They are tiny 1/4 turn things which are installed in the RHS of the switch body as you are looking at it from the front.

Grrrrrr · Mar 18, 2016

martyuk said:
Front of the switch just pops off, but you don't need to take it out to remove the lamps. They are tiny 1/4 turn things which are installed in the RHS of the switch body as you are looking at it from the front.

Ah, I know what you're on about. A green and an orange thing just back from the front. Wondered what they were for!

Best dig out my feeler guages. Cannot remember the last time I checked a spark plug or a pair of points.

tomcat59alan · Mar 18, 2016

Grrrrrr said:
Ah, I know what you're on about. Wondered what they were for
Cannot remember the last time I checked a pair of points.

Keep it clean mate

Grrrrrr · Apr 2, 2016

Grrrrrr said:
I must have cocked something up. Nighttime illumination isn't working and neither is the tell-tale, although the switch and relay works fine. Swear I spliced in the same colours to each other.

Going to have to take the whole lot apart again.

Switch bulbs replaced and all is good! Many thanks to MartyUK for donating the bulbs.

P38A Switches

martyuk

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

tomcat59alan

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Similar threads