RRkev
Active Member
- Posts
- 430
- Location
- Forest of Dean, Gloucestershire
hi guys just a quick one, i've just had suspension bushes replaced on the rear and have noticed my suspension was out of level, anyway i connected the allcomms and did the baseline setting (from wheel centre) 493mm front 483mm rear (taken from a post on fullfatrr) anyway i noticed after calibrating both fronts rose to 520mm and i had 470mm one rear and 510mm on the other. is the correct way to level this (i.e fronts) 520 - 493 which is 27mm too high so take the 27mm from the 493 giving 466mm setting and similar for the rears?
