support bearings

cremator · Apr 15, 2010

hi all as anyone got any tips on how to remove the 2 support bearings once the vcu as been seperated from the prop i have not go a bearing puller many thanks

rippedoff · Apr 15, 2010

Go to a local engineering workshop and ask them to do it for you.

cremator · Apr 15, 2010

do u you a pess to get them off or will they tap off

rippedoff · Apr 16, 2010

cremator said:
do u you a pess to get them off or will they tap off

You really should use some kind of puller to get them off and a press to put new ones on. Otherwise you might bugger up the shafts to which they go onto.

bigdenbailey · Apr 16, 2010

I used a 2/3 legged hub puller to do mine, did the job nicely.
To fit I used a suitable diameter tube and gently drifted the bearing on. Went on well.

cremator · Apr 17, 2010

hi ok got a new vcu how far do you tap the bearings on to the shaft and how many of those washers do u use mate

support bearings

cremator

New Member

rippedoff

Banned

cremator

New Member

rippedoff

Banned

bigdenbailey

Active Member

cremator

New Member

Similar threads