P38A Sunroof

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

oakey

Well-Known Member
Full Member
Posts
2,101
Location
Mull of Kintyre
1995 V8 auto 203k
Strange one
The sunroof has been working fine for ages and was smooth to operate
Suddenly yesterday dash said needs reset
No idea why
I have reset it loads of times before when it has needed it
I just dont understand why it suddenly lost reset.
It was very hot, would that make a difference?
Ta in advance
 
Don't know if it's related again, but the passenger side out station always shows in nanocom as can't communicate yet it works just fine. I put these kinds of things down to old age and/or bad connections
 
Thanks for advice folks
Seems well lubed as runs smoothly but will have a look and add grease tomorrow
I would have thought it would have stalled halfway and caused the reset but it wanted reset as soon as I pressed button
 
Mine did this ,but it was the seal round the sunroof made it sort of jam a little when it was closed for a while ,So i wet the seal with Vaseline:oops: and silicon spray seems ok now ,it was quite grubby but the Vaseline softened the dirt and it wiped of easy ....:rolleyes: seal goes hard n stiff in hot weather.. its a kind of felt like round the outside with rubber bit on the glass:D:D
 
And I never found any lol
BUT
I opened the sunroof to grease it etc and it worked first time
Last night it wanted a reset and I didnt do it
And now it works fine
Arent P38s wonderful?
I greased it anyway with spray grease and siliconed the seals
Thanks for your help
 
Back
Top