Suffix A / SD1 V8 throttle return spring

Evening All,

I have a SD1 V8 in my '72 RRC and whilst removing and cleaning one of the carburetors I took off the throttle return spring, which I'm struggling to put back.

Looking at several pictures on Google I have an incling that the spring previously was affixed in a 'bodge-it-and-see' way as the bracket it was installed with (pic attached) doesn't look to be standard nor does the springs original position (which I can vaguely recall before I removed the carb). I now have the typical over-revving on idle as the pedal's weight is now having an effect (punishment for not remembering where I took the spring off from maybe?).

Anyone able to help?

Thanks.

Don't know if this might help - ebay australia & has diagrams showing how it should look in situ.
ROVER SD1 V8 THROTTLE RETURN SPRING 603622 GENUINE LAND ROVER | eBay

You've also had a few suggestions on 'The Classic Rover Forum' which may work.