stuck clutch pedal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

pholme68

New Member
Posts
65
Location
York
Ayup,
Got in my petrol series3 today for the first time in about 9 months, the engine started first time but i can't push the clutch pedal down at all.
What's the most likely reason for this do you reck'?
 
If the pedal goes down but only comes back up slowly the hose to the slave cyl. may have collapsed inside forming a oneway valve.
 
Tsv thats a bugger that, I has that on a tranny brake pipe, apllied brakes they worked but one side stuck on, same thing collapesed pipe, after a while it released took fecking ages to find that on.

You might want to try rocking the landy forwards and bacwards whilst putting a bit of pressure on the pedal to see if the clutch will let go, you'll get a good idea if the master cyl is ok but bleeding it first, if the master cylinder pumps brake fluid then its probably ok and a stuck clutch.
 
Ayup,
Finally got round to looking at it, took the slave off and it was rusted solid. Guess that's the problem, trouble is i need to move the damn thing so am in the process of soaking it in oil. Don't really want to buy a new one just to move it two feet to the left on my drive. Got a new one on the diesel lump that just died, so i will swop it over once the two have swopped places on my drive.
 
Back
Top