border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
Stub Axle
- Thread starter border
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,538
- Location
- west wales coast
What you see is what you get, a bush.
- Posts
- 11,032
- Location
- North of the Wall
I'm not 100% sure, but I think there is on the fronts, but not on the rears.
tottot
Well-Known Member
- Posts
- 8,538
- Location
- west wales coast
Early 90/110 has a bush,later models [ 300 tdi on I think ] have a bearing.
border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
Looking for Part number for Kit up to KA some have bearings and some don't
.http://www.paddockspares.com/stub-axle-kit-def-front-up-to-ka.html
http://www.totalparts.co.uk/defende...le-kit-def-to-ka-front-supplier-bearmach.html
Mine looks like the one from Total Parts but cant find it on Paddocks.
.http://www.paddockspares.com/stub-axle-kit-def-front-up-to-ka.html
http://www.totalparts.co.uk/defende...le-kit-def-to-ka-front-supplier-bearmach.html
Mine looks like the one from Total Parts but cant find it on Paddocks.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
pictures are often only for illustrative rather than actual,d type stub axle is ka on
border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
I've been looking at parts Up To KA or is it the same.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
upto ka kit parts will look like the bearmach pic as will da3190 in reality
border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
Thanks just ordered from Paddocks.
border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
While we are on the subject of rebuilding the front axle, Got all the bits cleaned and ready waiting for new bearings ect.
Mine is the older axle Housing where it has three bung holes, one for filling one for checking level and one for draining, Do I still put the One Shot Grease in the top hole ?? as well as filling the axle with EP 90 ??
Mine is the older axle Housing where it has three bung holes, one for filling one for checking level and one for draining, Do I still put the One Shot Grease in the top hole ?? as well as filling the axle with EP 90 ??
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
either, a sachet of one shot is the required amount it doesnt need adding to unless you want to only put 1/2 of each in
tottot
Well-Known Member
- Posts
- 8,538
- Location
- west wales coast
Just fill axle and hubs with oil but grease wheel bearings before fitting.
border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
The One Shot comes with the kits. and I have drained the EP 90 from the axle. but will be renewing all seals as well as bearings,
border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
Got my new stub axle kits same as my old one. Now ive took the bits out but cant remember how far the brass bush went in, I know how to knock the seal in but not sure about the bush, don't want to damage it while knocking it in.
Wished they had come already built up
Wished they had come already built up
