border
Well-Known Member
- Posts
- 3,620
- Location
- North East. UK
I'm not 100% sure, but I think there is on the fronts, but not on the rears.Going to order parts for front axle rebuild, 110 1987.
These are the bits from my Stub Axles, I thought there was also a Bearing in there too ?
pictures are often only for illustrative rather than actual,d type stub axle is ka onLooking for Part number for Kit up to KA some have bearings and some don't
.http://www.paddockspares.com/stub-axle-kit-def-front-up-to-ka.html
http://www.totalparts.co.uk/defende...le-kit-def-to-ka-front-supplier-bearmach.html
Mine looks like the one from Total Parts but cant find it on Paddocks.
I've been looking at parts Up To KA or is it the same.pictures are often only for illustrative rather than actual,d type stub axle is ka on
upto ka kit parts will look like the bearmach pic as will da3190 in realityI've been looking at parts Up To KA or is it the same.
Thanks just ordered from Paddocks.upto ka kit parts will look like the bearmach pic as will da3190 in reality
either, a sachet of one shot is the required amount it doesnt need adding to unless you want to only put 1/2 of each inWhile we are on the subject of rebuilding the front axle, Got all the bits cleaned and ready waiting for new bearings ect.
Mine is the older axle Housing where it has three bung holes, one for filling one for checking level and one for draining, Do I still put the One Shot Grease in the top hole ?? as well as filling the axle with EP 90 ??
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!