storage solutions

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bluehaze

bluehaze

Well-Known Member
Posts
2,300
Location
The Lakes
I've been using a piece of wood across the wheel arches, in my 110 csw, with plastic boxes underneath. However, I would like to develop something a bit more sophisticated yet do not want to part with my hard eaned cash. I'm sure that there are numerous people who also feel this way.

Therefore I would like to get all the best ideas in one place.

I found this link:
Post up your drawer/storage system - Expedition Portal Forum

Could we build something similar?
 
Agreed - my aim is to make a good quality drawer for under £50.

I've bought a damaged army under bed locker (lid is seperated from the piano hinge) for a tenner. The sheet of 1/2" ply stands me at twenty and I'm off to find some roller bearing runners.

It'll probably not look as good as one of the chequer plate ones available from the big suppliers but it will be as strong and cost a fraction of the price.

I'll sort some pics out.

Anyone made a cooker housing for the back door?
 
bluehaze said:
I've been using a piece of wood across the wheel arches, in my 110 csw, with plastic boxes underneath.
Click to expand...

Sometimes the simplest solutions are the best. Instead of Ali Drawers, which are quite heavy, I have plastic boxes under a tight fitting ali shelf, and that works very well.

I forgot to photograph my storage system before I took it out, but you can see it at 7:05 in this video:

[nomedia="http://www.youtube.com/watch?v=DMCBnUnrpo0&feature=related"]YouTube- Leroy The Land Rover - Goes to Morocco - Part 3[/nomedia]
 
bluehaze said:
That looks really good fun - did you have a good time?

Did you make the cooker housing yourself?
Click to expand...

It was an absolute blast, can't wait to do another one. There are seven parts to that vid if you have an hour to kill :rolleyes:

I bought the cooker housing, it's really nicely made, but then I wasn't really on a tight budget.

Rich was on a budget, and did this (it worked just as well as mine) :

DSCF2390.jpg


DSCF2388.jpg
 
The first solution to rear storage was a piece of plyboard screwed onto 3x2" battons on the wheel arches. This allowed for two army style containers to slide in and out whilst leaving the remainder of kit in the back.

Then I bought an ex-army under bed locker. It had gone loose around the piano hinge and the rear section of the lid had started to seperate. Bargain at £10.

I removed the lid and cut the remainder flush. Then removed the un-wanted furniture.

Using the bits I'd cut off I constructed the frame, allowing 1/2" either side of the drawer to fit a set of 45kg ball bearing hinges, from B & Q at £15. This was fiddly and time consuming.

Once the drawer was fitted and the operation checked the right hand side was screwed in place.

I've set the front of the drawer back 5mm in order to cover it with a piece of chequer plate when I find a suitable piece.

All in £45

Original plyboard £20
Hinges £15
Locker £10
The pieces of 3x2" were free out of a skip - just needed to remove the plaster board nails and smooth them down.


Once the front receives a chequer cover the remainder will either be painted or covered in some sort of sound proofing.

Well happy
 

Attachments

  • jul 18 (20).jpg
    jul 18 (20).jpg
    181.2 KB · Views: 2,970
  • jul 18 (2).jpg
    jul 18 (2).jpg
    238.2 KB · Views: 2,613
  • jul 18 (6).jpg
    jul 18 (6).jpg
    236.3 KB · Views: 2,478
  • jul 18 (12) mail.jpg
    jul 18 (12) mail.jpg
    196.7 KB · Views: 7,393
  • jul 18 (7) email.jpg
    jul 18 (7) email.jpg
    245.5 KB · Views: 2,570
  • jul 18 (3) email.jpg
    jul 18 (3) email.jpg
    230.9 KB · Views: 2,443
  • jul 18 (10).jpg
    jul 18 (10).jpg
    141.1 KB · Views: 2,336
Thanks mate, I'll post some more pics when it's finished. Hopefully, I'll pick a nice piece of chequer plate up at the next show to put on the face of the drawer.

Might even develop some kind of locking mechanism!

Cooker housing on the back door next - research in progress.........
 
Wow, that gives me a couple of ideas.

Starting to think about some kind of integrated shelf as well. I'll have to move the tap to the side of the door.

However, off round the highlands for two weeks on Saturday so upgrades are on hold for a while............
 
redhand said:
I'm trying to think happy thoughts. But your spamming is reallhy ****ing me off and be a good chap and either introduce ya self properly and post ya shiote oiverpriced tat in the "section for spamming bastards" Yes we have a section just for cuunts like you!! Or fook off back under the stone you crawled out from.
Click to expand...


My thoughts exactly, and if we wanted to buy crap, we could buy in the UK :mad:
 
Alright who nicked me fooking post????? Can't have fook all in this place anymore If It int returned by the time I count to 3 trillion I is gonna trash the fooking place.. :mad:
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
M
Bicycle Rack Question
Replies
17
Views
2K
maubwana
M
Glyn D
Feedback for Tree Slider Design
Replies
9
Views
1K
flat
flat
300bhp/ton
Driven: New Defender - On & Off Road. Is it a Pretender?
2
Replies
30
Views
5K
lightning
lightning
natas
Hurricane Dorian survivor.
Replies
8
Views
2K
ProjectX
ProjectX
Back
Top