steering damper bolts

669hoff · Jun 9, 2010

Hi, I lost the bolts for the steering damper where it bolts on to the front diff on my disco. I ve looked everywhere and cant find them anymore.
Does anyone know what size they are so I can go and get some new ones.
Cheers
Sebastian

sierrafery · Jun 9, 2010

669hoff said:
Hi, I lost the bolts for the steering damper where it bolts on to the front diff on my disco. I ve looked everywhere and cant find them anymore.
Does anyone know what size they are so I can go and get some new ones.
Cheers
Sebastian

Hi mate, as far as I know the steering damper is bolted to the drag link and the chasis....at least at the Disco 2.....and it's an M10 i think(not sure).....but the unfailable way is to check with an inside calliper

669hoff · Jun 9, 2010

cheers, good idea i ll check it with the inside caliper now.
why are they metric when all the other bolts on the landy are imperial?

sierrafery · Jun 9, 2010

669hoff said:
cheers, good idea i ll check it with the inside caliper now.
why are they metric when all the other bolts on the landy are imperial?

I dunno why but that's why I've said that I'm not sure, but for the places where are used bolts tighetened with their nuts it doesnt matter.......besides not all af them are "imperial"

i.e, from RAVE :
Wheel alignment - front
......
Adjust drag link so that taper joint is centralised
in drop arm, then tighten drag link clamp bolts:
Tighten M8 bolts to 22 Nm (16 lbf.ft) and M10
bolts to 33 Nm (24 lbf.ft).
.......

steering damper bolts

669hoff

New Member

sierrafery

Well-Known Member

669hoff

New Member

sierrafery

Well-Known Member

Similar threads