Hay guys bought a nice p38 2.5 diesel and it’s failed it’s mot on the srs light so after much searching on the forum I seen all about the connection issues with the yellow connectors so went to go try that and I don’t have anything to plug the connector into under the driver seat the connector was just sitting there lol, it looks like someone has swapped the seats out for older ones isthere a way of bypassing this or is theresomething I can buy that missing can’t find any photos of what’s ment to be there lol cheers in advance
Srs issue p38
- Thread starter Deanojeff
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brianp38dse
Well-Known Member
- Posts
- 20,094
- Location
- heathrow
What year is your motor and have the seats got five stitch panels or three.
Not sure what you mean so added a photo of seats, it’s a 1999
Attachments
brianp38dse
Well-Known Member
- Posts
- 20,094
- Location
- heathrow
The seats you have are the three panel ones which were fitted to the early models but 99 may be on the change over,
the early one only had airbags in dash and stearing wheel, latter had side air bags in the seats
when you turn the ignition on do you get the red brake light come on next to the srs light as if that bulb fails the srs one will stay lit.
if the bulb is ok and its got early non air bag seats you can get resistor to plug in that fool the system .
the early one only had airbags in dash and stearing wheel, latter had side air bags in the seats
when you turn the ignition on do you get the red brake light come on next to the srs light as if that bulb fails the srs one will stay lit.
if the bulb is ok and its got early non air bag seats you can get resistor to plug in that fool the system .
Yeah it’s got a random air bag lying about under the passenger seat picture added, so must be a later one will one of those cheap resistors of eBay do it ok? Or is there a specific one to buy cheers
Attachments
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
I an make you up a resistor pack that does the job if you are stuck.
Hi mate how much would they be cheers
RangeRoller dt
Well-Sprung Member
- Posts
- 14,413
- Location
- Trapped inside my head @ LZ asylum
You’ve checked connectors on A pillar?
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
FOC but the postage would be about £7 from here, you would need to be able to solder the wires.
You could just buy a 1.5 ohm 2 watt 1% resistor which might be cheaper.
EntropyUK
Well-Known Member
- Posts
- 467
- Location
- Hemel Hempsted
Is that just add the resistor in line with the yellow wire?
Perfect mate thanks for the info I’ll grab some off eBay and give it a go lol
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
No, the resistor goes across the connector in place of the airbag to fool the SRS ECU into thinking the airbag is still there.
Similar threads
