Spoonofinsanity
Member
- Posts
- 67
MASSIVE MOT failure has occured
Got to replace 3 wheel bearings virtually all of the suspension bushes and most of the steering joints.
First Problem Both rear wheel bearings have excessive play but the n/s rear hub the drive member has been welded on by previous owner after stripping threads. So hub needs replacement i have a full set of 300 tdi dicovery rear axles in the garage so was going to pillage the hub but my defender axle is not well either very noisy.
Can i staight swap the rear axles?
Also i have all the arms etc from the dicovery could i polybush these and fit them when i fit the axle.
Are the radius arms etc the same size on 110 and disco?
Got to replace 3 wheel bearings virtually all of the suspension bushes and most of the steering joints.
First Problem Both rear wheel bearings have excessive play but the n/s rear hub the drive member has been welded on by previous owner after stripping threads. So hub needs replacement i have a full set of 300 tdi dicovery rear axles in the garage so was going to pillage the hub but my defender axle is not well either very noisy.
Can i staight swap the rear axles?
Also i have all the arms etc from the dicovery could i polybush these and fit them when i fit the axle.
Are the radius arms etc the same size on 110 and disco?
