Sorry Exhaust Post Agin!

Me exhaust's fooked so ordered a new one (full system) for 173 quid.
it comes 2moro

an i gotta fit it for thursday, so is there owt i need other than exhaust assembly paste to do the job ,

never done a full system b4



thanx


Nick

nickh75 said:

Me exhaust's fooked so ordered a new one (full system) for 173 quid.
it comes 2moro

an i gotta fit it for thursday, so is there owt i need other than exhaust assembly paste to do the job ,

never done a full system b4



thanx


Nick

Click to expand...

If it's for the Disco, bear in mind that the old one might be a one-piece, in which case you wil need to saw through the pipe after the middle box, to get it off.

Once all the old stuff is off, put the new middle box on first, then jack up the chassis to give working room before fitting the back box.
Cheers and good luck

Dave

a big fook off hammer, some beer






leekegs

all straight forward really did mine last Saturday without any probs ... well the anglegrinder did the hard bit for me. check the screws they give you with the exhaust are long enough ;-) mine needed longer ones which I had around.

didnt need any paste of kind ... althought there is a copper gasket at the manifold if yer doing it from front to back

thats should be it really :-D have fun



PS: the ramps came in very handy which I got from mondo ;-) they have been put to good use not just for the landy

Just changed mine on 300 for a Defender non cat one, plus blanked of the egr, new filter, & now off to
cornwall to a rally with caravan to see how she goes!

Just 1 gasket, manifold to front pipe shouldn't need any assembly paste either.

thanx for ya replys lads but i cheated

mate down the road said he'd fit it for 30 quid


so why should i get me hands dirty an me arse wet