Solenoid

Anchored · Jul 15, 2019

Possibly a silly question.
My Landy failed to start yesterday, the first time it has ever done this!
There is 11.6V on the battery but no noises from the solenoid or starter motor.
I have check the wiring as best I can and have not found any loose connections.
I am wondering should I just go out and buy a new solenoid, and if I do, how easy (or not) is it to remove and replace? Will I have to take the starter motor out at the same time?
I have looked at other posts on similar problems but none answer the questions above.
Even You Tube has failed me. I do use that quite a bit for other Landy related stuff.
Thanks in advance
Nigel

Colthebrummie · Jul 15, 2019

The first thing to do is charge the battery. These old starters take a fair bit of power to turn the engine over.

Col

tottot · Jul 15, 2019

Poor connection on the ignition wire [ the small one ] is common problem. Test with meter or 12v lamp. You do not say which model you have or if diesel or petrol. Solenoid may be on the starter or separate on the bulkhead, key operated or direct button.

Anchored · Jul 15, 2019

tottot said:
Poor connection on the ignition wire [ the small one ] is common problem. Test with meter or 12v lamp. You do not say which model you have or if diesel or petrol. Solenoid may be on the starter or separate on the bulkhead, key operated or direct button.

Sorry. It is a Series 3 diesel. Solenoid is on the starter motor. Thanks for the advice. I will check on the meter on Wednesday before work.

steve2286w · Jul 15, 2019

I would remove all connections on starter and clean then until bright, earths as well charge battery then have a go , is it even making a click when you turn key

tottot · Jul 15, 2019

Check the battery connection to starter is good and firm, if solenoid needs renewal remove starter. [ 3 bolts ] Good luck.

Anchored · Jul 15, 2019

steve2286w said:
I would remove all connections on starter and clean then until bright, earths as well charge battery then have a go , is it even making a click when you turn key

No, not at present. It did initially. Will be charging as soon as I get home on Wednesday. Thanks.

Anchored · Jul 15, 2019

tottot said:
Check the battery connection to starter is good and firm, if solenoid needs renewal remove starter. [ 3 bolts ] Good luck.

Cheers.

Solenoid

Anchored

Member

Colthebrummie

Well-Known Member

tottot

Well-Known Member

Anchored

Member

steve2286w

Well-Known Member

tottot

Well-Known Member

Anchored

Member

Anchored

Member

Similar threads