silicone flexi hose

Has anyone tried this for connecting a snorkel? My old hose is split so looking for a reliable replacement, the 2 ply im looking at

Flexible RED Hot & Cold /Warm Air Ducting Car Engine Brake Feed Intake Pipe Hose | eBay

I use similar (clear), where are you using it, under the bonnet?

yes from my airbox to the snorkel inside the wing

should be fine providing theres nothing to pierce it

discomark10 said:

should be fine providing theres nothing to pierce it

Click to expand...

+1 It is easy to pierce so careful positioning and fixing needed

I dont think there is anything to pierce it, is there a better solution you could suggest? i need it before next weekend.

Im going to miss out off roading tomorrow well at least I found it before I went in the water

should work fine, mine does!

Im looking to get some flexi pipe
I may get this
Flexi Induction Cold Air Intake Duct Pipe With Clamps | eBay

there is a firm what fits pumps to HGVs what i mean to call in on
They should have verious size induction pipe they use for ther pumps

Spunka said:

Im looking to get some flexi pipe
I may get this
Flexi Induction Cold Air Intake Duct Pipe With Clamps | eBay

there is a firm what fits pumps to HGVs what i mean to call in on
They should have verious size induction pipe they use for ther pumps

Click to expand...

thanks for that, it is more like i was looking for but I couldnt find and its around a quarter of the price..:scratching_chin:

Spunka said:

Im looking to get some flexi pipe
I may get this
Flexi Induction Cold Air Intake Duct Pipe With Clamps | eBay

there is a firm what fits pumps to HGVs what i mean to call in on
They should have verious size induction pipe they use for ther pumps

Click to expand...

I have ordered on of these now, worth a go at that price

Spunka said:

Im looking to get some flexi pipe
I may get this
Flexi Induction Cold Air Intake Duct Pipe With Clamps | eBay

there is a firm what fits pumps to HGVs what i mean to call in on
They should have verious size induction pipe they use for ther pumps

Click to expand...

I have given this stuff ago but im not completely happy with it, it is too difficult to seal the ends because of the wire spiral inside it.

I used 2 hose clamps each end with silicone sealant and one end slightly leaks with my hand over the top of the snorkel.

It will do for now i guess, will just keep out of the really deep stuff

I have just had 2 mtrs of this
63mm 2.5" Silicone 2 Py Blue Max Air Feed Ducting 1m | eBay
It quite thick (and expensive) so hopefully will work well, I'll be fitting it next week.

I used some foam sticky strip to give the wire somthing to squash into. You could run a silicone beed round the tube. When itdrys itl make a good seal

Discodad said:

I have just had 2 mtrs of this
63mm 2.5" Silicone 2 Py Blue Max Air Feed Ducting 1m | eBay
It quite thick (and expensive) so hopefully will work well, I'll be fitting it next week.

Click to expand...

Have you received this yet? I'm interested to know if it actually looks like the picture? I ordered twice from them and it was different (and of much lower quality) both times

Boris113 said:

Have you received this yet? I'm interested to know if it actually looks like the picture? I ordered twice from them and it was different (and of much lower quality) both times

Click to expand...

I can only compare it to the ducting that came with my old Southdown snorkel. This feels much more substantial.

Boris113 said:

Have you received this yet? I'm interested to know if it actually looks like the picture? I ordered twice from them and it was different (and of much lower quality) both times

Click to expand...

I have just been to a pipe shop
all they have is 63mm, my fixings are 65mm, the silicon hoses are ok (they stretch, nice fit) but the pipe with steel wire in wouldnt go over , I could have probably made it fit but may have made it week


so plan B
Ive ordered that pipe in the link I put on (the one mark D got) It will do for now ,76mm so i'll have to use reducer and stuff