Just finished this mod on my defender 300 tdi. Thought I would share it. The flexi conduit and fittings (20mm made by tower) were purchased from screwfix for under £12, and is enough to do two defenders.
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106883-add409388dc73147b7e2b677917bda67.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106884-4e3edd529011a97e5b559fb300d02b96.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106887-3c624432aa48069bc097924fd7dee34a.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106888-b0a405d5b62fe600e32d295d21adbe67.jpg)
The facia covering the left side screen blower pipe is wide enough to cover the two additional 20 mm conduit pipes on the left side. I did have to remove the blower funnel, as the scuttle needed to be elongated to allow clearance for the two pipes, then re fitted . The pipes terminate in to rubber grommets in the heater manifold. I marked round the facia and cut around the glove box plastic base tray to suit. Works a treat.
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106883-add409388dc73147b7e2b677917bda67.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106884-4e3edd529011a97e5b559fb300d02b96.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106887-3c624432aa48069bc097924fd7dee34a.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106888-b0a405d5b62fe600e32d295d21adbe67.jpg)
![image.jpeg image.jpeg](https://www.landyzone.co.uk/data/attachments/106/106889-bc495d00bac705390cb18544065484b5.jpg)