Serious question for a change!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Weldy

Well-Known Member
Posts
1,450
Location
me own little world
howdy doo ...
Need some advice please , if you don’t mind...
94 disco with no fob thingy to open doors .. how easy is it to foberate my central locking??
I’ve got a donor disco! Will attach picture of it whilst removing propshaft!!
Anyhoo.. could I use its thingy and how? All comments appreciated
2E87FC1A-5A54-4013-97B4-C3A66CBC4AF7.jpeg
regards
Weldy
 
I assume you have a 200 series D1 as the later 96MY 300 series (as shown) requires a fob to start the engine, unless the factory fitted security system has been removed, if it has, then all u require is a remote central locking kit plus a master door actuator installed. (See eBay for kits) Simples.

If you do have 200 series and the central locking functions with the door key then all you require is a single button fob to give the remote function. (Google Remote Key)
 
I assume you have a 200 series D1 as the later 96MY 300 series (as shown) requires a fob to start the engine, unless the factory fitted security system has been removed, if it has, then all u require is a remote central locking kit plus a master door actuator installed. (See eBay for kits) Simples.

If you do have 200 series and the central locking functions with the door key then all you require is a single button fob to give the remote function. (Google Remote Key)
Just googled remote key!! Cheers bud.. sent me in the right direction..
 
Back
Top