Series 3 servo

Hello sort of new to this. Had 2 land rovers about 30 years ago and have just gone mad and bought a project in bits. The thing is i have a brake pedal box for non servo brakes and i want to fit a servo. The engine (200tdi)has vac pump. will the servo and master fit standard pedal box and do i need a vac tank. thanks. Think i may have posted this i wrong place before.

You do not need a vac tank easiest option is to fit a later servo version pedal box or you can use a remote servo. Which will fit under the wing on the offside.

Blackburn said:

You do not need a vac tank easiest option is to fit a later servo version pedal box or you can use a remote servo. Which will fit under the wing on the offside.

Click to expand...

Remote I think .I wont have a lot of space with an intercooler ,oil cooler and power steering to all go around a 200tdi. Also while i am here what rad do i fit in series 3 with 200tdi. Still learning

I've a series rad, the intercooler and oil cooler are between it and the grille. Has worked so far, though I would like to fit an electric fan.

Remote servo will fit in the space under drivers side wing to the right of your current brake pedal. non of the 200tdi parts would normally be located there.

+1 for the remote servo - use up some space which is hard to use any other way

I fitted a remote servo to SWMBO's clutch - thread here:-

https://www.landyzone.co.uk/land-rover/servo-assisting-the-clutch-300tdi-r380.301335/

Has the eblag item number in there for a copy of an MG servo actually recommended for series brakes