winchman
Active Member
- Posts
- 746
Not seen any series hard tops for the rear, Canvas and sticks is too expensive so loads of cheap Ifor williams defender rear hard tops about so will they fit a series 2a truck cab?
Series 2a 1964 will an Ifor top fit?
- Thread starter winchman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
Yes but be prepared to modify it. I bought a cheap Ifor W top for my Sankey, had to shorten it by a foot and narrow it by 6" but now its done it fits great and looks good. You need tin snips, a hacksaw and a few hundred pop rivets. Series tops do come up sometimes. I'm sure if you start with a 90 top it will be pretty close. If you do have to narrow it don't cut it down the middle, cut it 1" offset so you get an overlap and use the pieces cut from the hoops upside down as joiners.
winchman
Active Member
- Posts
- 746
Thanks
winchman
Active Member
- Posts
- 746
88
winchman
Active Member
- Posts
- 746
Found a rear canvas just need some hoops now, any one have a drawing?
Similar threads
