Sealed Beam headlamp (pop)

The passenger side headlamp on my defender has gone pop,I was gonna upgrade the headlamps & wanted some advice if possible please.

I was looking at these:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=140025522221&ssPageName=STRK:MEWA:IT&ih=004

Are they gonna be relatively easy to fit & will I have to start setting the beam etc?

If they are the same as mine, and they look quite similar, all you need to do, is take the old sealed beam out, put that in, with the bulb fitted already, and the connector will push onto the back of the bulb.

you still need to set the beam though

i suspose they'll be a direct replacment...fer yer sealed beams...
i like the blokes description, most stylish light he's seen!! ffs its a round light

Surly it would only need reset if he touched the screws which change the angles?

If you know someone with a defender, park alongside each other and face a wall, do your best to get them to match.

A neighbour here calibrates his lights for MOT's by using the 4th brick up on a wall at the end of the lane while in line with a neighbours gate.

I think I will go with those then
What about the H4 ice xenon bulbs!!
Anyone used these? They sound nice.

they aint really xenon mate, they just give off a white light like xennon, don't know how good they are or how long they would last, i would just stick with normal h4's

Bought some of them for the disco a few years back, poped every few months... gave up and back to normal ones.

You will have to tell us the results.

Are they any good or not?

I went for these with the normal H4's
Oooohhh.

They are OK light wise, but they were useless as you ended up without a light altogether often.