Otto
New Member
- Posts
- 49
- Location
- Whitehaven, Cumbria
Does anyone have a link on changing the hub oil seals on a salisbury axle, mine are shot and need replaced, but I don't want to start something I can't finish.
Regards
Otto
Regards
Otto
Salisbury oil seal replacement, how to ?
- Thread starter Otto
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
try this...
http://www.landyzone.co.uk/lz/f41/rear-wheel-bearings-renewed-58851.html
(but take a very careful note on which way the seals were fitted originally)
Other than that, it's quite an easy job tae do
http://www.landyzone.co.uk/lz/f41/rear-wheel-bearings-renewed-58851.html
(but take a very careful note on which way the seals were fitted originally)
Other than that, it's quite an easy job tae do
Otto
New Member
- Posts
- 49
- Location
- Whitehaven, Cumbria
I already found this bustersbus, its really good of you to supply the information for us all. However, my axle has disc brakes attached, not the drums as on the photo's, would this make any difference?
Regards
Otto
Regards
Otto
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Pretty much the same idea.. just remove the caliper and hang/ secure it safely out of the way and then remove the hub as above
Ye're welcome
Otto
New Member
- Posts
- 49
- Location
- Whitehaven, Cumbria
Thanks bustersbus, I'll let you know how I get on.
Regards
Otto
Regards
Otto
