SAIC head gasket

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Morten said:
No, but did you not use to have a MGF? :) Or am I mistaking, sorry for hijacking your thread..
Click to expand...
I still have my 'F, Morten :). And two Freelanders. I bought the last one yesterday, a 2000 Open Air with a leaking head gasket and a grinding noise somewhere in the drivetrain.
 
The MLS gasket really works if you fit all the other improvements at the same time. There is a strengthened oil rail, steel locating dowels and the later head bolts. The liners also need to protrude an equal amount to equalize the clamping loads. These mods will still need the PRT stat to improve gasket life further.
 
Last edited:
Nodge68 said:
The MLS gasket really works if you fit all the other improvements at the same time. There is a strengthened oil rail, steel locating dowels and the later head bolts. The liners also need to protrude an equal amount to equalize the clamping loads. These mods will still need the PRT stat to improve gasket life further.
Click to expand...

Don't forget the low coolant level warning mod ;). If yer don't check whether there's any coolant in there all the other mods won't do much ;)!!
 
You must log in or register to reply here.

Similar threads

B
Paste or no paste on a new cylinder head gasket 1987 LDV90 19j 2.5td
Replies
2
Views
681
briam352
B
L
Starter problem after new head gasket
Replies
2
Views
522
haza88
haza88
D
P38 4.6l gems blown head gasket
Replies
19
Views
1K
pwood999
pwood999
O
Head gasket upside down
Replies
14
Views
2K
Obi_110
O
Kev12
Head bolts loose? And other questions
2 3
Replies
42
Views
4K
Kev12
Kev12
Back
Top