S3 109 Safari project......

GSF 109

Well-Known Member

Posts

812

Location

Scotlandshire

• Today at 08:34

• #761

steve2286w said:

Lookin very nice indeed, can’t me much more to do?

Click to expand...

Thanks!, I still have door tops to build up for the front, fit the 2nd row doors and build up, a front wing to be painted, rear safari door to repair and paint, and not forgetting to complete the wiring, fuel system, sort out seating, etc… so plenty to do yet

 

steve2286w

Well-Known Member

Posts

5,168

Location

monkeyangerland

• Today at 09:21

• #762

Been a mammoth project for you but you can see the finish line, I did my rear door with a new bottom repair piece which came up the sides and a new skin but it seems to dent easily can’t have been the proper birmabright spec.

 

GSF 109

Well-Known Member

Posts

812

Location

Scotlandshire

• Today at 16:27

• #763

steve2286w said:

Been a mammoth project for you but you can see the finish line, I did my rear door with a new bottom repair piece which came up the sides and a new skin but it seems to dent easily can’t have been the proper birmabright spec.

Click to expand...

You are right - still a lot to do but every step forward is a win! I was going to order a lower repair section for the safari door too. Where did you buy yours from? I suspect they will all be the same.

 

steve2286w

Well-Known Member

Posts

5,168

Location

monkeyangerland

• Today at 20:41

• #764

This was it , and I posted about it, thought I bought it with the sides but I must have cut and welded reading this back

Rear door bottom repair

every time the wind catches the door it swings round 180 and I need to buy another fog light lens! A few queries here as this is next job for this month * The sliding stay arm does not really do anything on mine as it’s just wigging in a big rust hole ,does anyone have one that works properly-...

www.landyzone.co.uk

 

Last edited: Today at 20:51