Rx8 leather
- Thread starter Fry847
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
How easy to remove if battery access is required?, I keep thinking about getting some.
Cheers
300bhp/ton
Well-Known Member
- Posts
- 4,742
- Location
- Near MK
Dreadful. Well you have to take the seat out
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
The base is held to the seat frame with four bolts, you can do away with the rear two and just use the front two so you can remove it when fitted and get to the battery more easily
Its a bit of a nightmare tbf but couldnt see another way round it
JimS
Well-Known Member
- Posts
- 9,687
- Location
- Not far enough away from London
It's no different with the factory fitted Exmoor Trim seats I've got, 4 bolts holding the seat down. Bit of a pain, just added an anderson plug to the front of the seat box in case I need to charge it etc
Somebody I know just bought a 57 plate RX8 (that actually works well) and in good condition, 12 months MOT, £500
Unbelievable car for the money. Costs more to tax it....
Somebody I know just bought a 57 plate RX8 (that actually works well) and in good condition, 12 months MOT, £500
Unbelievable car for the money. Costs more to tax it....
300bhp/ton
Well-Known Member
- Posts
- 4,742
- Location
- Near MK
Are you meaning keep the seat bolted down but able to lift the base up a bit like a standard LR seat?
johnsonca9
Active Member
- Posts
- 68
- Location
- South Yorkshire
Youtube video by any chance? Just watched the exact same scenario, guy bought a £500 RX8 on a 57 plate. He got an MGB and a Cobra too?
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
Yes. Do away with the rear bolts holding the seat squab on and you can use the front two to hold it in place and you can get to them when the seats are bolted in. Personally I'd probably make some studs or hooks out of longer bolts with the heads cut off just to locate the rear into the holes the bolts used to go through.
JimS
Well-Known Member
- Posts
- 9,687
- Location
- Not far enough away from London
That's the chap, goes to the local classic car meets.
I think you are basically buying the seats and the car comes with them
