Retro transfer box

My ninety has a 200tdi fitted from a disco and associated gearbox and transfer box. I am thinking though that because i am towing alot the gear changes are long and sluggish. Maybe i am better going back to 1:41 ratio. Can i just swap this box over? i understand there may have been some alterations to the hand brake mechanism to get the disco transfer box in. Any one got a spare one of these box's in devon area

straight swap,just ensure both boxes dont have dowels in the 2 locations and one at least does

jamesmartin said:

straight swap,just ensure both boxes dont have dowels in the 2 locations and one at least does

Click to expand...

Thanks
No potential problems with hand brake Linkage? I think i read somewhere that something with the positioning had to be altered to get it to fit in.

depends whats fitted to yours put 1.410 should have 2 x 8mm holes for bracket in rear facing part of speedo housing disco the side ,300tdi have none ,so should be ok fitting def box to def

jamesmartin said:

depends whats fitted to yours put 1.410 should have 2 x 8mm holes for bracket in rear facing part of speedo housing disco the side ,300tdi have none ,so should be ok fitting def box to def

Click to expand...

Sorry to be a bit vague. My gearbox is a disco box. I am intending to put a defender 1:41 x-fer box onto disco gearbox, is this all still the same.
Cheers

yes the same ,unless you get t/box 25d from lt85