Regulator Plastic Bush

My NSR window dropped and wouldn't close. On close inspection I found that the plastic bush that sits in the channel has snapped in half disconnecting the regulator arm from the bottom of the window glass.
The regulator mechanism and motor are fine, all I need is the plastic or nylon bush. Are these available separately or do I have to purchase an entire window regulator?

Nope it's a replacement regulator, although the are some ingenious people who have made their own replacement nylon sliders so search the www.

discool said:

Nope it's a replacement regulator, although the are some ingenious people who have made their own replacement nylon sliders so search the www.

Click to expand...

Thanks for the reply Discool. Seems a waste to have to buy a complete regulator just for the sake of a little plastic washer.
Oh well.

I had to replace the regulator as I wanted th use the disco the next day so fitted a new regulator, I sill have the old one so when I get around to it, it will get repaired although it was a bit bent up.
Mine was the front pasenger window, a window that is never used just like the back two.

Morning 7builder, had to change window reg on mine yesterday, one of the slider's failed, plus the spot weld's on toothed quadrant, if you still wanting slider's, I can salvage them before throwing the rest in the scrap, can stick them in a jiffybag, just the P+P . regards Boldor

Boldor said:

Morning 7builder, had to change window reg on mine yesterday, one of the slider's failed, plus the spot weld's on toothed quadrant, if you still wanting slider's, I can salvage them before throwing the rest in the scrap, can stick them in a jiffybag, just the P+P . regards Boldor

Click to expand...

Thanks for the offer Boldor but I have ordered a new regulator already. I didn't want to hang about as the rear window is being propped up by a piece of wooden batten at the moment. Not the most secure or weather proof solution.