Stuballsed
New Member
- Posts
- 1,093
- Location
- Oxfordshire
Fixing faulty rear wiper, I hope. Would not opperate but I could hear slight hum from motor. Stipped it down (not taken cogs apart though). One of the magnets came out stuck to he coil. Couple of questions:
What glue do I use to refix the magnets in the housing?
The coil will spin about six full turns over the main cog. Should I leave this about mid point on reasembly? i.e. about three turn back from point where it is fully screwed in?
I've put a bit of grease on the cogs.
Anything else?
Cheers Dudes and Dudettes
What glue do I use to refix the magnets in the housing?
The coil will spin about six full turns over the main cog. Should I leave this about mid point on reasembly? i.e. about three turn back from point where it is fully screwed in?
I've put a bit of grease on the cogs.
Anything else?
Cheers Dudes and Dudettes
Last edited:
