L322 Rear Wiper

J

jcbond87

Member

Posts

29

• Jan 11, 2024

• #1

Hello,



I have just replaced the wiper cog in my l322 rear wiper motor. The wiper works but stops at 6 o'clock with a slight buzzing sound, if I push it, the wiper runs and stops correctly.



If I pull the wiper off the glass or runs ok'ish... But isn't smooth.



Any thoughts?



Jon

 

Mark Piercy

Well fumbled member....

Full Member

Posts

12,660

Location

Sud ouest France !

• Jan 11, 2024

• #2

Something jamming inside the wipe gearbox? I'd go back into it and double check

 

backinblack

Well-Known Member

Full Member

Posts

6,225

Location

North Manchester

• Jan 11, 2024

• #3

The motor spindle runs in a bush not a bearing so if/when the spindle rusts it starts to bind in the bush. The wiper ECU should sense the increased load and turn the motor off until the ignition is cycled off and on.