Series 3 Rear tub seat belt mounting bracket

Afternoon all.
I'm struggling
Can anyone advise on how/where the following fix/go?

It's on a S3 lwb station wagon

codfather79 said:

Afternoon all.
I'm struggling
Can anyone advise on how/where the following fix/go?

It's on a S3 lwb station wagon

View attachment 288208

Click to expand...

Where are you fitting the belts? Front or rear?

And what sort of belts? Simple lap belts, or diagonal and lap belts, or roller belts?

I think they are for the rear!!! They came with the YRM rear floor kit. Confused.com.....!

codfather79 said:

I think they are for the rear!!! They came with the YRM rear floor kit. Confused.com.....!

Click to expand...

Assuming they are for the three forward facing seats in the back of the 12 seat SW, then.

As far as I can remember, neither of my 12 seater SWs had rear belts at all, but they were a bit older than that, a 67 and a 71, so no requirement for belts.

Afraid I have never had a YRM floor kit, but maybe someone that has used one will be along in a bit.

Best of luck. If you just want to get on, might be easier to continue with fitting the tub, and fit the belts later. It may become more obvious with the thing in place.

Thank you
The kit says they are series SW 2nd row seat belt mounting.

Wow them ribs are way out of wack, nothing lines up.... mine were too big as well I had to cut them down to fit, I didnt want to mess around with it too much as they have glalve on them, at the top you can see 2 rusted bolt things, they are for front lap seatbelts you hook them up to a loop I think, not sure I dont use them

Dopey said:

Wow them ribs are way out of wack, nothing lines up.... mine were too big as well I had to cut them down to fit, I didnt want to mess around with it too much as they have glalve on them, at the top you can see 2 rusted bolt things, they are for front lap seatbelts you hook them up to a loop I think, not sure I dont use themView attachment 288223

Click to expand...

That rib is not yet fitted
I didn't know if the seat belt mounting was fitted to it! Hence not fitting it

the good folks at YRM came to my rescue.