shadowster
Well-Known Member
- Posts
- 1,372
- Location
- 55'38.4n.4'49.1w
Hiya combat2008, I have the answer for and it won't cost a penny and will only take about ten mins - have I got your attention now !!
First, take out the radio/CD - it should just pull straight out;
Next get hold of some string, feed the open end under the left hand side of the centre console and bring it up through the radio hole, leave ample spare at the other end then cut.
Do the same on the rhs.
So you should have two string tails coming out of the centre console sides and your radio CD? Now tie the string tails (which came through the radio aperture) to the cable bundle, ensure the the other end on the strings are still available.
Once the strings are attached to the cable bundle, start to fit the radio unit into the aperture, and put a modest amount of tension of the strings, to pull the cable bundle further down and out of the way.
What you should find is that by teasing the strings, you move the cables out of the way of the of the radio unit, so the unit will fit much deeper into the centre console.
Hope that helps,
Cheers
Dave
well did it work
