Radio wires (aaaaargghhhhh)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

bustersbus

Well-Known Member
Posts
13,755
Location
Near Dumfries, Scotland
Havin a bit trouble sorting oot the wires for me cd/radio:eek: Got a connector block today and it has a ....
RED wire marked 'ignition switched'
Black " " " " " " " 'chassis ground'
Blue " " " " " " " " 'power antenna'
Orange " " " " " " "''dash light illumination'
Yellow " " " " " " " 'battery constant'

Probably wont need the Blue wire, so that's out.

Already in the dash is......
1 White wire (thick) with grey triple connector
1 Black wire (thick) " " " " " " " " " " " " " " "
1 Brown wire (thick) " " " " " " " " " " " " "
2 Red/White (thin) " " " " " " " "" " " " " " " "
1 Orange/White wire (thin) on single female bullet connector
2 Light Green/White wires (thin) joined to " " " " " " " " " " " " " " " "


What I'd REALLY like to know is wot wires join together so's I can have a radio in me 1991 110.
Cheers;) :D :D :D


 
See which bits were live and when they were live an see which bits joined onto what bits.
ERRMMM... OK:eek: Accordin to the haynes book, brown is live so yellow should go onto that. black is erf so black goes to that. red goes onto orang/white maybe, or is it just white? Jeez this is confusin':rolleyes: :D
 
yer gort speakers fitted or is that a real dumb question
Not yet, but that's the easy bit, got them sussed;) :D Its a seperate plug for them:D Ain't even got the aerial fitted yet!!! Which is another question ah was gonna ask. Can ah get away with just fittin' it tae the roof or will ah need tae earth it to the chassis or summit?
 
Basically most radios have three main wires (ignore the speaker and airel wires for now) for them to work, (1) an earth (2) a fused constant live (3) a switched live taken from the ignition switch. Find these wires with use of a multimeter and you cant go far wrong. If the connector block thats in the truck are "land rover original" then you can get a connecter lead from most motor factors including Halfords that will connected from the land rover to the make of the radio you have.:D
 
Basically most radios have three main wires (ignore the speaker and airel wires for now) for them to work, (1) an earth (2) a fused constant live (3) a switched live taken from the ignition switch. Find these wires with use of a multimeter and you cant go far wrong. If the connector block thats in the truck are "land rover original" then you can get a connecter lead from most motor factors including Halfords that will connected from the land rover to the make of the radio you have.:D
Aye cheers:D Think ah've got it sorted now, just had the neighbours muti meter on and found out wot's wot:D
Brown= live so that goes to yellow
Black= earth so that to black
White= switched to red (and if it don't light up, join the orange one here)

Another wee job to do tomorrow:rolleyes:
Cheers guys;) :D :D

Sooooo, wot about the aerial? Does it have to be earthed to steel or will the roof be ok?
 
Back
Top