Radiator hoses to expansion tank??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
K

Kernow90

Member
Posts
34
Location
Cornwall
Hi folks,

Had to replace my rad due to cheap online one splitting on top where filler plug goes.

A friend sold me a 2.5 petrol rad which fits fine but now I've just installed it I've only just realised that it's got one outlet for the small hoses next to the filler plug, I'm running a 3.9efi and want to know.

Can I just blank off the small hose going to the header tank and connect the hose from the inlet manifold to the port on the rad? Or do I need to have both hoses connected? If so I'm buggered.

Thanks
 
You would be better off getting the correct rad imo, you may find that the 2.5 petrol one doesn’t have the cooling capacity for a 4l v8
 
flat said:
You would be better off getting the correct rad imo, you may find that the 2.5 petrol one doesn’t have the cooling capacity for a 4l v8
Click to expand...
Obviously id be better off getting a v8 rad but looking into it the 2.5 td rad is identical and cheaper so opted for one of those. Ended up getting the Y piece splitter off a 300tsi which does the same job as having the two hoses.
 
Kernow90 said:
Obviously id be better off getting a v8 rad but looking into it the 2.5 td rad is identical and cheaper so opted for one of those. Ended up getting the Y piece splitter off a 300tsi which does the same job as having the two hoses.
Click to expand...
Just keep an eye on your temps, i added two flat plate heat exchangers to our old l200 to pre heat the veg oil, added anextra 2lts of cooling water.
took a little longer to heat up but no great difference over all.
 
Kernow90 said:
Obviously id be better off getting a v8 rad but looking into it the 2.5 td rad is identical and cheaper so opted for one of those. Ended up getting the Y piece splitter off a 300tsi which does the same job as having the two hoses.
Click to expand...

Oh cool

Is it the same internally?
 
Kernow90 said:
Hi folks,

Had to replace my rad due to cheap online one splitting on top where filler plug goes.

A friend sold me a 2.5 petrol rad which fits fine but now I've just installed it I've only just realised that it's got one outlet for the small hoses next to the filler plug, I'm running a 3.9efi and want to know.

Can I just blank off the small hose going to the header tank and connect the hose from the inlet manifold to the port on the rad? Or do I need to have both hoses connected? If so I'm buggered.

Thanks
Click to expand...
Both hoses are there for a purpose and are important, without the heating at the inlet manifold the cold engine could have running issues, and with the hose to the header tank, that is there for 1. venting the system via the valve in the header tank cap, 2. it’s the only venting method that the engine cooling systems has, plus it’s used for adjusting the hot & cold expansion of the coolant that takes place in the header tank.

I’m sure u know the capacity of the V8 rad around 11.30 litres but the rad fitted to the disco tdi is 11.50 manual, 11.70 auto. That’s according to my owners handbook.
 
Last edited:
You must log in or register to reply here.

Similar threads

Bustrucket
Disco 2 Td5 Overheating
Replies
3
Views
833
johnlad
johnlad
enjoi
P38A Going through radiators- not overheating
2 3 4
Replies
60
Views
4K
enjoi
enjoi
T
Pressure Build Up on Hoses and Overheating 2.5na 110. Help
Replies
2
Views
568
the-prince-e-paul
T
enjoi
P38A My good friend, coolant leak, is back!
Replies
7
Views
1K
Andy Burrell
Andy Burrell
V
Freelander 2 (LR2) Hoses
Replies
5
Views
3K
Vinny73
V
Back
Top