Quick Question

Realist · Feb 6, 2011

Hi Dudes,

Purchased a Synergy 2 from Fleebay for £150 notes now Im looking at this MAF from Eurocarparts quoting their part number 434220200 for about £65 delivered.

Is this the correct better MAF to fit or should I just keep my original in place and see how it goes?

Regards

2.0_hippo · Feb 6, 2011

well i would recommend purchasing one and fitting it at the same time as your synergy.

even tho my original was fine, i got the better maf as the synergy does recommend fitting one for better performance.

so i fitted both at the same time.

changed mine together, added a K+N filter today and it runs great now, real quick aswell

Realist · Feb 6, 2011

Thanks but is the above MAF sensor the correct one?

willo · Feb 6, 2011

As far as I know the Pierburgh is indeed the one recommended with the Synergy unit.

Realist · Feb 6, 2011

The one from RoverRons is about £10 more expensive than the one from Europarts, hence the question if its the correct one.

willo · Feb 6, 2011

Sorry, maybe compare (if possible) the part number given by Pierburgh on the unit itself ?
(Not the seller's catalogue number). (But would these extra 10£ matter if you can be re-assured of the correct combination given by RoverRon ??)

Realist · Feb 6, 2011

Yes 100% correct and we all know Rons stuff work out of the bag.

Thanks.

Chaser · Feb 6, 2011

Realist said:
Hi Dudes,

Purchased a Synergy 2 from Fleebay for £150 notes now Im looking at this MAF from Eurocarparts quoting their part number 434220200 for about £65 delivered.

Is this the correct better MAF to fit or should I just keep my original in place and see how it goes?

Regards

There's no point in changing a working maf, keep the original.

You don't say you have any symptoms of a faulty or out of spec maf.

The synergy has a maf compensator, that's what it's for, compensating for an out of spec maf. If you don't need it leave it switched off, if you do, use the adjustment to decide on a setting based on removing the symptoms.

Tramper · Feb 7, 2011

Can i ask where you got the K/N filter from ,poss do you have a link very interested in one.

Realist · Feb 7, 2011

Well Im off on hols for a week from today so testing the MAF sensor and fitting the Synergy will have to be done next weekend.

Im going to keep the current MAF sensor and see how it goes and if needs be I'll change it later.

Regards and thanks all.

Realist · Feb 12, 2011

Well I purchased a Synergy 2A from Ebay and the bloody things got lost in the post, was expecting it before this weekend.

Not my day, was looking to see if it works as well as you guys say.

Owe well.

Quick Question

Realist

Active Member

2.0_hippo

Well-Known Member

Realist

Active Member

willo

Well-Known Member

Realist

Active Member

willo

Well-Known Member

Realist

Active Member

Chaser

New Member

Tramper

New Member

Realist

Active Member

Realist

Active Member

Similar threads