scarecrow243
Active Member
- Posts
- 139
- Location
- wormit fife
Hi I have just changed the clutch master/slave cylinder on my 1.8 hippo as It was getting hard to change gear I got one from a car breakers £20 all fitted and working great I have also just changed the full propshaft £40 from the same car I removed the prop very easily by jacking the drivers side up onto axle stands this allowed the shaft to be turned by any wheel to get at the bolts if you find them too tight just pull the hand brake on the whole lot was easy compared to what I have read putting the other prop on I did need a hand its all working fine now 
