Please help bleeding clutch problems

Hi there all landy lovers I've bought a bleeding kit and followed what to do but it's not working I'm pumping the clutch pedal slowly but I'm still drawing air something is not right. The fluid level is always staying topped up and I can't find a leak any where. Now my disco is stuck in my drive intill ive fixed it lol. Has anyone got any ideas. Many thanks

This any help

More info would help. Have you changed anything? Why are you bleeding? Are you actually getting air out or not getting any pedal?

Hi there I'm not getting anything on the pedal at all I'm sure there is still air inside. I never raised the front of the car up and I left the cap off to keep topping up the fluid could this be where I'm going wrong. I'm bleeding because my clutch pedal went about an inch before there was pressure and its hard to change gear but not all the time. Someone said to me I've got air in there some how. I haven't changed anything

you need an assistant,pump pedal few times open nipple on down stroke.hold down close nipple with pedal down. pump few times repeat several times keeping res topped up. worked for me.

i had trouble bleeding mine recently, i borrowed one of these GUNSONS EEZIBLEED EASYBLEED Brake Clutch Fluid Pedal Bleeding Systems | eBay was that impressed i bought one. easy to do on your own

Very unclear from what you've said what your problem is..."I'm not getting anything on the pedal" - does this mean it goes all the way to the floor with no resistance ? "..my clutch pedal went about an inch before there was pressure..". Sounds like the slave cylinder is on it's way out, pressure sometimes, nothing the next. Bleed as noted by Bigeeeee, only needs a bit of rubber tube and jam jar. Unlikey to be air getting in at random.

I have just had the same problem i changed the clutch master cylinder it solved the problem now the pedal is perfect and can get the gears.

Many thanks for all the comments I've had no luck so it's come down to this lol