Plastic/rubber seal between seat box and sill?

abettertomorrow · Jan 21, 2020

Hi
I’m removing battery box and sill from my 110 (mot failure) and there is a seal between the two which is now ruined. where can I buy this seal and can I just get a roll or something and cut it to length?
Don’t know what it’s called so struggling to search for it!
Thanks!

abettertomorrow · Jan 21, 2020

Just to add I don’t mean the carpet retaining part. The seal that is sandwiched between the bottom of the battery box and top of the sill

lynall · Jan 21, 2020

Mine didnt have one, so fitted one and door would not shut, so threw it in the bin!

lynall · Jan 21, 2020

kevstar · Jan 21, 2020

lynall said:
Mine didnt have one, so fitted one and door would not shut, so threw it in the bin!

You threw the door in the bin

kevstar · Jan 21, 2020

abettertomorrow said:
Hi
I’m removing battery box and sill from my 110 (mot failure) and there is a seal between the two which is now ruined. where can I buy this seal and can I just get a roll or something and cut it to length?
Don’t know what it’s called so struggling to search for it!
Thanks!

I used a brush on panel sealant on mine.

tottot · Jan 21, 2020

just put bead of silicon sealer between the two.

nobber · Jan 21, 2020

Tigerseal; , every time, unless its the rivetted on rubber seal you are talking about?

lynall · Jan 21, 2020

kevstar said:
You threw the door in the bin

Tempted many a time!

kevstar · Jan 21, 2020

lynall said:
Tempted many a time!

Adjusting & tightening the hinges ahhggggg fs lol

abettertomorrow · Jan 22, 2020

Thanks for replies !
Might use tiger seal

mick the builder · Jan 22, 2020

I used neoprene tape.

Dippypud · Jan 22, 2020

Have heard a split inner tube from a mountain bike works anorl ...

bluedog333 · Jan 23, 2020

Depending on which seal you’re on about, I sometimes use 3M weather strip between panels.

mick 1986 · Jan 23, 2020

mick the builder said:
I used neoprene tape.

So do I. YRM sell them by the roll, 1mm or 3mm thick, around 100mm wide. It’s between every metal to metal surface on mine.

Plastic/rubber seal between seat box and sill?

abettertomorrow

Member

abettertomorrow

Member

lynall

Well-Known Member

lynall

Well-Known Member

kevstar

Well-Known Member

kevstar

Well-Known Member

tottot

Well-Known Member

nobber

Well-Known Member

lynall

Well-Known Member

kevstar

Well-Known Member

abettertomorrow

Member

mick the builder

Well-Known Member

Dippypud

Never Knowingly Understood

bluedog333

Well-Known Member

mick 1986

Well-Known Member

Similar threads